Skip Traditional Toilet Paper Holders: Grab A Hanger For Rustic Charm
AIThis post was created with the assistance of artificial intelligence (AI).

TL;DR

Prime Big Deal Days · Oct 6–7Offer from Amazon

Get furniture and decor delivered free — and shop member deals

  • Fast, free delivery on millions of items
  • Access to Prime Big Deal Days deals on October 6–7
  • Prime Video, Amazon Music and more included
Start your free Prime trial Free trial for eligible customers · Cancel anytime
As an affiliate, we earn on qualifying purchases.

A Hunker report describes a DIY by YouTube creator Kelly Barlow that turns a wire clothes hanger into a toilet paper holder, using the hanger’s cardboard tube as a spindle. The project uses basic tools and craft materials; its finish can be changed or left plain. The report does not provide cost, durability or installation testing.

Hunker has reported on a DIY toilet paper holder made from a wire clothes hanger by YouTube creator Kelly Barlow. The project repurposes the hanger’s cardboard crossbar tube as the roll’s spindle and uses twine, burlap and optional decorations to give the bathroom accessory a rustic appearance.

Barlow’s design is intended for a wire hanger with a removable cardboard tube along its bottom. The tube is reused to hold the toilet paper roll, while the hanger provides the frame. The materials listed in the report include flat- or needle-nose pliers, wire cutters, a ruler, marker, tape, twine, hot glue, burlap ribbon and scissors.

In the described process, Barlow removes the tube and cuts away the hanger’s curved ends. She measures about five inches from each bend near the neck, cuts the wire, then tapes the shortened pieces back onto the hanger’s bottom. The cardboard tube is trimmed to fit between them. Twine is wrapped around the wire and tube and secured with hot glue; the report says Barlow applies distress ink to make the twine look aged.

For decoration, Barlow adds a burlap bow, a faux sunflower and greenery. Those elements are optional: the report suggests using other craft materials, colorful yarn or ribbon, or leaving off embellishments. It presents the holder as a small-scale reuse project, not as a tested or commercially rated bathroom fixture.

At a glance
reportWhen: Reported by Hunker; the source material…
The developmentHunker has reported on a DIY project by Kelly Barlow that repurposes a wire clothes hanger as a rustic-style toilet paper holder.

A Second Use for Wire Hangers

The project offers a way to reuse a common household item rather than discard it, while making a functional bathroom accessory with readily available craft supplies. For readers interested in low-cost DIY decor, the main appeal is the option to adapt the finish to a room instead of buying a matching holder.

Its practical value will depend on the condition and shape of the hanger, how securely the parts are joined and whether the holder is mounted or placed for use. Hunker’s report describes the construction but does not provide load testing, durability results or a cost comparison. Those limits matter if readers are weighing the project against a purpose-built holder.

Amazon

rustic DIY toilet paper holder

As an affiliate, we earn on qualifying purchases.

As an affiliate, we earn on qualifying purchases.

How Barlow Reworks the Hanger

The idea belongs to a broader category of upcycling projects that give everyday items a different use. In this case, the hanger’s frame supports the roll, while the cardboard tube that once sat across its bottom becomes the central spindle. The design depends on having a hanger with that removable tube; the source does not say that every wire hanger has one.

The rustic look is created by the added materials rather than being an inherent feature of the hanger. Twine and burlap contribute the reported farmhouse-style finish, while the sunflower and greenery add decoration. Barlow’s suggested substitutions mean the same basic construction can be made plainer or more colorful, though the report does not provide separate instructions for alternative designs.

““It works especially well if your wire hanger has a removable cardboard tube along the bottom, since Barlow reuses the tube as the spindle that holds the toilet paper.””

— Hunker’s report, describing Barlow’s design

Questions About Fit and Durability

The source does not state how long the holder lasts, how much weight it can support, or whether it has been tested in a humid bathroom. It also does not specify a mounting method or explain whether the finished hanger should be attached to a wall or used as a freestanding dispenser. Readers should not assume the project provides the same stability as a purpose-built holder.

Other details are also unreported, including the project’s total cost, time required and whether particular hanger dimensions are needed. The instructions depend on a removable cardboard tube and a hanger that can be safely cut and reshaped. The source offers no performance comparison with traditional holders.

Check the Hanger Before Starting

Anyone following the project should first check that the hanger has a reusable cardboard tube and gather the listed tools and supplies. The source specifically advises wearing safety glasses when cutting wire and keeping a firm grip on the cutters. Readers should also work carefully with hot glue and scissors, following the tools’ safety instructions.

The remaining steps are a matter of adapting the finish: wrap the frame and tube in twine, secure the covering with hot glue, and add or omit decorations. Hunker does not announce a follow-up test or additional instructions, so stability and fit remain for makers to assess based on their hanger and intended setup.

Key Questions

What does the wire hanger become?

It becomes a toilet paper holder. The hanger forms the frame, and its removable cardboard crossbar tube is reused as the roll’s spindle.

What supplies does the project use?

The report lists pliers, wire cutters, a ruler, marker, tape, twine, hot glue, burlap ribbon and scissors. Barlow also uses distress ink and decorative faux flowers, which are optional.

Does the holder have to look rustic?

No. Hunker says makers can swap twine for colorful yarn, replace the burlap and sunflower with coordinating ribbon, or skip the embellishments.

Wear safety glasses when cutting the wire, as a cut piece could fly. Use suitable wire cutters and maintain a firm grip, as the report advises.

Has the holder’s durability been tested?

The source does not report durability or load testing, give a mounting method, or compare the design with store-bought holders. Those details are not established in the report.

Source: rss

FALL

Fall Picks

As an affiliate, we earn on qualifying purchases.

You May Also Like

This DTC Home Brand Sells The Most Gorgeous Quiet Luxury-Inspired Finds

A direct-to-consumer home brand is gaining attention for selling high-end, quiet luxury-inspired home decor and furnishings, with search interest surging.

Discover 10 Game-Changing Furniture and Decor Tips That Will Revamp Your Home!

Get ready to transform your space with 10 innovative furniture and decor tips that will leave you craving more! Discover the secrets inside.

Mattress Firmness Decoded: Pick the Right Feel in One Read

Choosing the right mattress firmness is crucial for restful sleep, and this guide reveals how to find your perfect feel—so you can sleep soundly tonight.

Upholstery Trends: Bold Patterns, Velvets & Textured Fabrics

An exploration of upholstery trends revealing bold patterns, luxurious velvets, and textured fabrics that can transform your space—discover how to elevate your style.